A composite revolution with CLEARFIL MAJESTY ES Go with the flow Low

A composite revolution with CLEARFIL MAJESTY ES Go with the flow Low

by


Fig. 1: The patient had worn teeth, visible abrasion, erosion and crowding in the mandibular arch.

Fig. 1: The affected person had worn enamel, visual abrasion, erosion and crowding within the mandibular arch.

Fig. 2: Orthodontic treatment was performed to align the full arch.

Fig. 2: Orthodontic remedy was once carried out to align the entire arch.

Fig. 3: A silicone mould was used for the flowable injection technique to restore the teeth with flowable composite. The silicone injection mould had injection channels prepared and was placed to check for proper fit.

Fig. 3: A silicone mold was once used for the flowable injection way to repair the enamel with flowable composite. The silicone injection mold had injection channels ready and was once positioned to test for correct have compatibility.

Fig. 4: For this case, it was decided to use CLEARFIL MAJESTY ES Flow Low in Shade XW (Kuraray Noritake Dental), the properties and flowability of which made it ideal for a case like this.

Fig. 4: For this example, it was once made up our minds to make use of CLEARFIL MAJESTY ES Go with the flow Low in Coloration XW (Kuraray Noritake Dental), the homes and flowability of which made it superb for a case like this.

Fig. 5: PTFE tape was used to separate the teeth.

Fig. 5: PTFE tape was once used to split the enamel.

Fig. 6: The restoration is completely additive; the teeth are not prepared at all. Total etching of the enamel is the best pretreatment in this situation. K-ETCHANT Syringe (35% phosphoric acid; Kuraray Noritake Dental) was applied for 10 seconds.

Fig. 6: The recovery is totally additive; the enamel aren’t ready in any respect. General etching of the tooth is the most productive pretreatment on this scenario. Okay-ETCHANT Syringe (35% phosphoric acid; Kuraray Noritake Dental) was once carried out for 10 seconds.

Fig. 7: A surgical suction tip was used to carefully remove the phosphoric acid gel and protect the isolations on the teeth, followed by rinsing off completely with water in the usual manner.

Fig. 7: A surgical suction tip was once used to scrupulously take away the phosphoric acid gel and offer protection to the isolations at the enamel, adopted through rinsing off totally with water in the standard means.

Fig. 8: Each tooth was gently air-dried for 10 seconds. CLEARFIL Universal Bond Quick was applied with a rubbing motion without additional waiting time, followed by drying of the treated surfaces by gentle blowing of air for more than 5 seconds until the bonding no longer moved.

Fig. 8: Every teeth was once gently air-dried for 10 seconds. CLEARFIL Common Bond Fast was once carried out with a rubbing movement with out further ready time, adopted through drying of the handled surfaces through mild blowing of air for greater than 5 seconds till the bonding now not moved.

Fig. 9: Each bonded tooth was light-polymerised for 10 seconds.

Fig. 9: Every bonded teeth was once light-polymerised for 10 seconds.

Fig. 10: Using the “Treat one, skip one” protocol, several teeth were restored simultaneously by injecting CLEARFIL MAJESTY ES Flow Low into the silicone mould.

Fig. 10: The usage of the “Deal with one, skip one” protocol, a number of enamel had been restored concurrently through injecting CLEARFIL MAJESTY ES Go with the flow Low into the silicone mold.

Fig. 11: Situation directly after the first round of injections.

Fig. 11: Scenario immediately after the primary spherical of injections.

Fig. 12: Situation after restoring all of the teeth, before polishing.

Fig. 12: Scenario after restoring the entire enamel, prior to sharpening.

Fig. 13: To create a natural gloss, the following polishing protocol was used: (1) Sof-Lex discs (3M); (2) CLEARFIL Twist DIA for Composite polishing wheels; (3) diamond paste; and (4) zinc oxide paste.

Fig. 13: To create a herbal gloss, the next sharpening protocol was once used: (1) Sof-Lex discs (3M); (2) CLEARFIL Twist DIA for Composite sharpening wheels; (3) diamond paste; and (4) zinc oxide paste.

Fig. 14: This polishing protocol yielded high-shine results.

Fig. 14: This sharpening protocol yielded high-shine effects.

Fig. 15: Final restoration, immediately after treatment.

Fig. 15: Ultimate recovery, straight away after remedy.

Leave a Comment